Note:  This patch will not work with RCS (any version) or LOCUS processor
(any version).

The patch will allow download from a PCMCIA card using a PC card
reader.  This download patch can be used in 2 different methods. 


METHOD 1: Modify your Solutions 2.40 or 2.50 installation. This 
method is recommended if you have Solutions 2.40 or 2.50.

The 2 patch files, Dload32.exe and engine32.dll, are required patch 
files for Solutions version 2.40 and 2.50 software.

The procedure for installing the patch is as follows:

(1) Copy the 2 files to the Ashtech Solutions\bin directory on your 
computer.  The \bin directory is most likely located as follows on 
your computer:

C:\Program Files\Ashtech Solutions\bin

You will need to overwrite the two existing files.

Some installations will have a different path. It is critical 
to place the 2 files in the \bin directory which is within the 
Ashtech Solutions directory.

(2) Start the Solutions Download program from the Windows Start menu, 
or from inside Ashtech Solutions.

Verify that it is Ashtech Download 2.55. 

Software version information is found at Help | About Download.


METHOD 2: "STANDALONE"

If you do not have Solutions 2.40 or 2.50, it is possible to run the 
download module "standalone". 

Simply copy the 3 files, Dload32.exe, stpdlg32.dll, and engine32.dll, to a directory on the hard drive (not a network drive). You can then run the download module by double clicking on the Dload32.exe file in 
Windows Explorer, or by placing a shortcut on your desktop.
